How to deal with the common failure of rotation error of small excavator

[BONOVO]

How to deal with the common failure of rotation error of small excavator? Bottom wheel excavatormanufacturers to explain all the relevant content.

1. First, disassemble the two rotary release valves around the motor to improve the characteristics of the valve body and seal ring.

2. Disassemble the rotating motor, the cylinder and distribution plate can not find the original cutting condition, and the working gap is good. Make sure the elasticity of the magazine is normal and won't break. The seals on the brake pressure plates are also intact.

3. Check the oil return path of the brake system You can see colloidal particles in the oil return port, and the hole is not fully blocked, so the oil return is slow, time-consuming and the brake component is working. Therefore, when the shaking motion stops, the rolling amount (jitter Angle) appears large.

4. After identifying the cause of common faults, engineers clean the parts and pay great attention to the throttle holes and small oil passages. After full cleaning, assemble the components and test the car.

Wheeled excavatormanufacturers interpret the common fault solution of small excavatorrotation error in this way, I hope to have some help for you.

Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com