What should the loader pay attention to when changing the tire?

[DIG-DOG]

Control loading quality and travel speed. The loadertire standard specifies the load at the speed and corresponding tire pressure.

The manufacturer recommends that the tire pressure of the loaderis determined according to the standard requirements in the rated load of the vehicle and the load borne by the tire during normal operation.

Therefore, the vehicle should be loaded according to the rated load calibrated by the loader, and it is acceptable to overload within 15% under normal circumstances. However, overload work will deform the tire, which will seriously affect the service life of the tire.

High or low tire pressure can lead to early tire wear and seriously affect the service life of the tire.

Low air pressure is easy to cause excessive deformation of the tire under load, increase the ground area, uneven tread wear, increase the shear stress between the tire fabric layers, and high friction heat, resulting in the delamination of the tire. At the same time, the tire fabric line in the tire is easy to break when it encounters obstacles.

High air pressure is easy to stretch the cord inside the tire too much and break, resulting in the body burst. The pressure of the tire is an important parameter of the load bearing capacity of the tire, and the pressure specified in the tire standard is the pressure at room temperature (15-20°C).

Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com