Loader two busy tire wear how to replace

[BONOVO]

It is suitable for narrow space, with side movement, left and right movement, which can effectively improve working efficiency and reduce operating noise. The leg is equipped with hydraulic lock, which can easily achieve high efficiency operation, therefore, it is also easy to cause tire wear, how to prevent wear easily?

Correct choice: Match according to the applicable scope. The same machinery, to ensure that the tire brand, structure, function is the same, if it cannot be guaranteed, to set the same brand, the same provisions, the same type of tire on the coaxial.

When replacing, according to the coaxial, the whole vehicle with the same replacement, with the direction of the striped tire, in accordance with the prescribed rolling direction. When using new tires, install the new tire on the front wheel and the repaired tire on the rear wheel. To ensure driving safety, retreaded tires are prohibited from being used as direction wheels.

Strictly in accordance with the provisions of tire inflation, after inflation, check whether the position is leaking, check the air pressure regularly, to ensure that it meets the specifications, and develop the habit of measuring air pressure with a barometer. Prohibit the use of "look" judgment to ensure that the tire is flexible, when accepting a certain load, the deformation can not exceed the specified range, to ensure that the two busy during the operation with super stability, comfort, spare fetal air pressure to engage in, to avoid running.

During the operation, if the air pump works well, check the oil drain plug or pressure regulator of the oil-water separator to avoid by-passing. Check the two check valves in the tee joint again, the check valve stuck will cause the air reservoir can not be admitted or the intake is slow.

Deviation after braking: indicates that the braking torque of both sides of the wheel is unequal, it is easy to cause serious oil pollution of the brake caliper disc, and the friction system is seriously decreased, resulting in unbalanced braking torque. The oil on the caliper disc must be removed; Branch pump piston stuck can not work, static brake, observe the work of the branch pump, disassemble according to the specific situation.

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com