In one step, it is no longer difficult to judge the belt tension of a wheeled hydraulic excavator

[DIG-DOG]

After the wheel hydraulic excavator has worked for a period of time, its belt may have some loose problems, but for some novice drivers, he is not very experienced, so he can not immediately judge the tension of the belt, and there may be some faults or difficulties when driving. However, the novice driver friends do not worry too much, and the next Xiaobian will tell you how to judge the tightness of the belt tension of the wheeled hydraulic excavator.

First of all, we first judge the tension of the belt, and strongly press the belt in the middle of the two belts with the thumb. According to the pressure is about 10kg (98N), if the belt pressure is about 15mm, then the belt tension is just right. If the amount of pressure is too large, it is considered that the belt tension is insufficient. If there is almost no reduction in the belt, it is considered that the tension of the belt is too large. When the tension is insufficient, the belt is prone to slip. Excessive tension is easy to damage the bearings of various auxiliary machines. Therefore, always check and adjust the tension of the belt to the state. If it is a new belt, the amount of pressure is about 10-12mm, it is considered that the belt tension is just right.

Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com