How to solve the problem of excavator engine "hot"

It is not allowed to publish illegal or illegal content, otherwise it will be blocked.
User avatar
DIG-DOG
Posts: 460
Joined: Oct 20th, '24, 22:38
Location: China
Contact:

How to solve the problem of excavator engine "hot"

Post by DIG-DOG »

Excavator is mainly a construction vehicle used in the construction industry, mainly used to engage in excavation work, many drivers have encountered such a problem after driving the vehicle for a period of time, that is, touch the engine with your hand, the temperature of the engine is very high, reaching the point of hot, in this case, you need to immediately cool the engine. Otherwise, there is likely to be an engine failure problem, and then we will talk about how to solve the problem of "hot" Excavatorengine.

First, let the vehicle stop construction, but can not close the vehicle, to let it idle for a period of time. Idle engine rotation, can reduce some of its own load and speed, its internal friction heat production will be reduced, the heat generated will be reduced, to a certain extent back to reduce the temperature of the engine.

Second, open the two side doors and shutters of the vehicle, and use air to dissipate heat. After opening these parts, the internal and external air circulation of the vehicle can be significantly increased, so that the water temperature drops little by little under the action of the cooling fan, and a large number of bubbles generated by the cooling system can be released to reduce the water temperature of the tank.

Third, after the temperature drops, open the cover of the radiator. When opening the radiator cover, in order to avoid hands, we need to wrap the cover with a wet towel and then open it, until the water vapor in the water radiator is released, at this time, turn the boiling water on the radiator cover, and be sure to pay attention to not being hot skin when opening.

4. After the temperature drops, add coolant to the vehicle again. When adding the coolant, be careful not to add tap water.

The above is about to solve the problem of Excavatorengine "hot" method introduction, hope to help you.

Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
Post Reply