Tips for saving fuel on mini excavators

[BONOVO]

Anyone who drives a mini excavator knows that in addition to the maintenance of the machine, the daily operating cost accounts for the majority, which is burning oil. Do you feel dizzy and heartbroken every time you refuel the machine? Since refueling is inevitable, it is necessary to work hard from saving fuel (today to some hard disks) to provide you with fuel-saving tips for excavator operation.

Before sharing, think of yourself as an excavator, you will better understand why.

1. When loading, the excavator should be in a higher position and the truck should be parked at the same height as the work surface.

The reason is simple, a stone, you Is it as hard to lift your knees as your head? How much "energy" will it save? Assuming the height is the same as before, you can increase the efficiency by 40%. Cool!

2. When the bucket cylinder and connecting rod, the top rod cylinder and the top rod are all 90°, each cylinder pushes the excavator with great force.

3. When excavating the ground, the bucket or loosening device should keep the ground angle at about 30° and then retract the bucket rod. When the bucket rod is close to vertical, the bucket rod has great force and can withstand greater loads.

These two key points are like bending your arms to carry things, or keeping Keep your arms straight, but bend them.

4. At the beginning of excavation, do not extend the bucket rod to a large extent. The best effective range is about 80%.

5. Bucket axis excavation plan: The bucket axis is 30° from the farthest 45° to the inner angle.

The excavation depth is slightly different, but the larger bucket rod and bucket should be operated within this range, and not used at the end of the hydraulic cylinder stroke.

6. During continuous excavation, place the chassis forward so that you can walk immediately after excavation. If you want to walk, change it again. You will burn a lot at the beginning and end. Oil.

7. When digging a trench, first dig the two ends of the trench, and then dig the center. In this way, digging in the center can save a lot of work and energy.

8. Put the engine in economic gear. Select automatic idling to allow the engine to idle during digging.

9. Optimize the rotation radius.

10. The smaller the excavation depth, the better the excavation economy.

It is divided into three layers of excavation: upper, middle and lower. If it is carried out from low to high, the effect scale will increase first, and then decrease due to the increase in the power scale of the excavator, reducing the operating power, which will cost a lot of oil.

Mini crawler excavator，Mini crawler excavator attachments，Excavator attachments，Crawler excavator，Mini excavator purchase

Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com